Mechanical Behavior Laboratory University of Nevada, Reno

Paper Abstract

[J67] Yu, Q., Zhang, J., Jiang, Y., and Li, Q., 2012, "An Experimental Study on Cyclic Deformation and Fatigue of Extruded ZK60 Magnesium Alloy," International Journal of Fatigue, Vol.36, pp.47-58. doi: 10.1016/j.ijfatigue.2011.08.016

Back to Publications

Abstract67

[J67] Yu, Q., Zhang, J., Jiang, Y., and Li, Q., 2012, "An Experimental Study on Cyclic Deformation and Fatigue of Extruded ZK60 Magnesium Alloy," International Journal of Fatigue, Vol.36, pp.47-58

Paper Figures

Fig. 3

Fig. 3. Monotonic tension and compression: (a) absolute stress versus absolute strain (Download data) and (b) absolute stress versus absolute inelastic strain (Download data).

Fig. 4

Fig. 4. Stress-strain hysteresis loops for extruded ZK60: (a) Δε/2 = 1% (Download data); (b) Δε/2 = 0.5% (Download data); (c) Δε/2 = 0.35% (Download data).

Fig. 5

Fig. 5. Variation of stress responses with the number of cycles under strain amplitudes ranging from 0.35% to 1% for extruded ZK60: (a) tensile and compressive peak stresses (Download data) and (b) mean stress (Download data).

Fig. 6

Fig. 6. Stabilized hysteresis loops at half-life cycle for extruded ZK60 (Download data).

Fig. 7

Fig. 7. Stabilized mean stress versus strain amplitude for extruded ZK60 (Download data).

Fig. 8

Fig. 8. Cyclic stress-plastic strain curve (CSPSC) and monotonic stress-plastic strain curves for extruded ZK60 (Download data).

Fig. 9

Fig. 9. Strain-life fatigue curve for extruded ZK60 Mg alloy (Download data).

Fig. 10

Fig. 10. SWT parameter and its fitting curve for extruded ZK60 (Download data).

Top