Mechanical Behavior Laboratory University of Nevada, Reno

Professor Yanyao Jiang's Citation Reports

Professor Jiang's Google Citation


2020 | 2019 | 2018 | 2017 | 2016 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2009~2010 | 2008 | 2007 | 2006 | 2005 | 2004 | 2000~2003 | Prior to 2000


[J108] Wang, Y., Culbertson, D., Jiang, Y., 2020, "An experimental study of anisotropic fatigue behavior of rolled AZ31B magnesium alloy," Materials and Design, Vol.186, 108266 doi: https://doi.org/10.1016/j.matdes.2019.108266

[J107] Xiong, Y., Jiang, Y., "Compressive deformation of rolled AZ80 magnesium alloy along different material orientations," Journal of Materials Science, Vol.55, pp.4043-4053 10.1007/s10853-019-04238-5

Top

[J106] Carneiro, L., Jalalahmadi, B., Ashtekar, A., Jiang, Y., 2019, "Cyclic deformation and fatigue behavior of additively manufactured 17-4 PH stainless steel," International Journal of Fatigue, Vol.123, pp.22-30 doi: 10.1016/j.ijfatigue.2019.02.006

[J105] Wang, F., Lui, M., Sun, J., Feng, M., Jin, L., Dong, J., Jiang, Y., 2019, "Effects of initial {10-12} twins on cyclic deformation and fatigue of magnesium alloy at low strain amplitudes," Materials Characterization, Vol.149, pp.118-123 doi:10.1016/j.matchar.2019.01.017

Top

[J104] Gong, M., Xu, S., Jiang, Y., Liu, Y., Wang, J., 2018, "Structural Characteristics of {1012} Non-cozone Twin-Twin Interactions in Magnesium," Acta Materialia, Vol.159, pp.65-76, doi: 10.1016/j.actamat.2018.08.004

[J103] Culbertson, D., Yu, Q., Jiang, Y., 2018, "In situ observation of cross-grain twin pair formation in pure magnesium," Philosophical Magazine Letters, Vol.98, No.4, pp.139-146, doi: 10.1080/09500839.2018.1498599

[J102] Xiong, Y., Gong, X., Jiang, Y., 2018, "Effect of initial texture on fatigue properties of extruded ZK60 magnesium alloy," Fatigue & Fracture of Engineering Materials & Structures, Vol.41, pp.1504-1513, doi: 10.1111/ffe.12792

[J101] Chen, P., Li, B., Culbertson, D., Jiang, Y., 2018, "Negligible effect of twin-slip interaction on hardening in deformation of a Mg-3Al-1Zn alloy," Materials Science and Engineering: A, Vol.729, pp.285-293, doi: 10.1016/j.msea.2018.05.067

[J100] Shun, X., Gong, M., Jiang, Y., Schuman, C., Lecomte, J.-S., Wang, J., 2018, "Secondary twin variant selection in four types of double twins in titanium," Acta Materialia, Vol.152, pp.58-76, doi: 10.1016/j.actamat.2018.03.068

[J99] Xiong, Y., Yu, Q., Jiang, Y., 2018, "Deformation of extruded ZK60 magnesium alloy under uniaxial loading in different material orientations," Materials Science and Engineering: A, Vol.710, pp.206-213, doi: 10.1016/j.msea.2017.10.059

[J98] Chen, P., Li, B., Culbertson, D., Jiang, Y., 2018, "Contribution of extension twinning to plastic strain at low stress stage deformation of a Mg-3Al-1Zn alloy," Materials Science and Engineering: A, Vol.709, pp.40-45, doi: 10.1016/j.msea.2017.10.038

Top

[J97] Culbertson, D., Yu, Q., Wang, J., Jiang, Y., 2017, "Pre-compression effect on microstructure evolution of extruded pure polycrystalline magnesium during reversed tension load," Materials Characterization, Vol.134, pp.41-48, doi: 10.1016/j.matchar.2017.10.003

[J96] Mei, J., Dong, P., Kalnaus, S., Jiang, Y., Wei, Z., 2017, "A path-dependent fatigue crack propagation model under non-proportional modes I and III loading conditions," Engineering Fracture Mechanics, Vol.182, pp.202-214, doi: 10.1016/j.engfracmech.2017.07.026

[J95] Castro, F., Jiang, Y., 2017, "Fatigue of extruded AZ31B magnesium alloy under stress- and strain-controlled conditions including step loading," Mechanics of Materials, Vol.108, pp.77-86, doi: 10.1016/j.mechmat.2017.03.002

[J94] Dong, S., Yu, Q., Jiang, Y., Dong, J., Wang, F., Jin, L., Ding, W., 2017, "Characteristic cyclic plastic deformation in ZK60 magnesium alloy," International Journal of Plasticity, Vol.91, pp.25-47, doi: 10.1016/j.ijplas.2017.01.005

Top

[J93] Xiong, Y., Jiang, Y., 2016, "Cyclic deformation and fatigue of rolled AZ80 magnesium alloy along different material orientations," Materials Science and Engineering A, Vol.677, pp.58-67, doi: 10.1016/j.msea.2016.03.031

[J92] Culbertson, D., Jiang, Y., 2016, "An experimental study of the orientation effect on fatigue crack propagation in rolled AZ31B magnesium alloy," Materials Science and Engineering A, Vol.676, pp.10-19, doi: 10.1016/j.msea.2016.08.088

[J91] Liu, Y., Li, N., Shao, S., Gong, M., Wang, J., McCabe, R.J., Jiang, Y., Tomé, C.N., 2016, "Characterizing the boundary lateral to the shear direction of deformation twins in magnesium," Nature Communications, Vol.7, Article number: 11577, doi: 10.1038/ncomms11577

[J90] Liao, X., Wang, J., Nie, J., Jiang, Y., Wu, P., 2016, "Deformation twinning in hexagonal materials," MRS Bulletin, Vol.41, 314-319, doi: 10.1557/mrs.2016.64

[J89] Castro, F., Jiang, Y., 2016, "Fatigue life and early cracking predictions of extruded AZ31B magnesium alloy using critical plane approaches," International Journal of Fatigue, Vol.88, pp.236-246, doi: 10.1016/j.ijfatigue.2016.04.002

[J88] Xiong, Y., Yu, Q., Jiang, Y., 2016, "Cyclic deformation and fatigue of extruded AZ31B magnesium alloy under different strain ratios," Materials Science and Engineering A, Vol.649, pp.93-103, doi: 10.1557/mrs.2016.64

Top

[J87] Dong, S., Wang, F., Wan, Q., Dong, J., Ding, W., Jiang, Y., 2015, "Aging effects on cyclic deformation and fatigue of extruded Mg-Gd-Y-Zr alloy," Materials Science and Engineering A, Vol. 641, pp.1-9, doi: 10.1016/j.msea.2015.06.001

[J86] Yu, Q., Jiang, Y., Wang, J., 2015, "Tension-compression-tension tertiary twins in coarse-grained polycrystalline pure magnesium at room temperature," Philosophical Magazine Letters, Vol.95, pp. 194-201, doi: 10.1080/09500839.2015.1022621

[J85] Ding, Z., Gao, Z., Wang, X., Jiang, Y., 2015, "Modeling of fatigue crack growth in a pressure vessel steel Q345R," Engineering Fracture Mechanics, Vol. 135, pp.245-258, doi: 10.1016/j.engfracmech.2015.01.011

[J84] Yu, Q., Jiang, Y., Wang, J., 2015, "Cyclic deformation and fatigue damage in single-crystal magnesium under fully reversed strain-controlled tension–compression in the [1010] Direction," Scripta Materialia, Vol.96, pp.41-44, doi: 10.1016/j.scriptamat.2014.10.020

[J83] Dong, S., Yu, Q., Jiang, Y., Dong, J., Wang, F., and Ding, W., 2015, "Electron backscatter diffraction observations of twinning-detwinning evolution in a magnesium alloy subjected to large strain amplitude cyclic loading," Materials and Design, Vol.65, pp.762-765, doi: 10.1016/j.matdes.2014.09.079

Top

[J82] Dong, S., Y. Jiang, J. Dong, F. Wang, and W. Ding, 2014, "Cyclic deformation and fatigue of extruded ZK60 magnesium alloy with aging effects," Materials Science and Engineering: A, Vol.615, pp.262-272, doi: 10.1016/j.msea.2014.07.074

[J81] Yu, Q., Wang, J., Jiang, Y., McCabe, R.J., Li, N., and Tomé, C.N., 2014, "Twin-twin interactions in magnesium," Acta Materialia, Vol.77, pp.28-42, doi: 10.1016/j.actamat.2014.05.030

[J80] Xiong, Y., and Jiang, Y., 2014, "Fatigue of ZK60 Magnesium alloy under uniaxial loading," International Journal of Fatigue, Vol.64, pp.74-83, doi: 10.1016/j.ijfatigue.2014.02.019

[J79] Cao, Q.P., Jin, J.B., Yu, Q., Wang, X.D., Zhang, D.X., Jiang, Y., and Jiang, J.Z., 2014, "Tensile Elastic Behavior of a Zr–Cu–Ag–Al Bulk Metallic Glass," Journal of Materials Science & Technology, Vol.30, pp.595-598, doi: 10.1016/j.jmst.2013.12.020

[J78] Xiong, Y., Yu, Q., and Jiang, Y., 2014, "An experimental study of cyclic plastic deformation of extruded ZK60 magnesium alloy under uniaxial loading at room temperature," International Journal of Plasticity, Vol.53, pp.107-124, doi: 10.1016/j.ijplas.2013.07.008

[J77] Wang, F., Dong, J., Feng, M., Sun, J., Ding, W., and Jiang, Y., 2014, "An experimental study of fatigue damage development in extruded Mg-Gd-Y magnesium alloy," Materials Science and Engineering A, Vol.589, pp.209-216, doi: 10.1016/j.msea.2013.09.089

[J76] Wang, J., Yu, Q., Jiang, Y., and Beyerlein, I.J., 2014, "Twinning-associated boundaries in hexagonal close-packed metals," JOM, The Journal of The Minerals, Metals & Materials Society (TMS), Vol.66, pp.95-101, doi: 10.1007/s11837-013-0803-0

[J75] Qin, Y., Wang, J., Jiang, Y., McCabe, R.J., and Tomé, C.N., 2014, "Co-zone {1012} Twin Interaction in Magnesium Single Crystal," Material Research Letters, Vol.2, pp.82-88, doi: 10.1080/21663831.2013.867291

Top

[J74] Zheng, S., Yu, Q., Gao, Z., and Jiang, Y., 2013, "Loading history effect on fatigue crack growth of extruded AZ31B magnesium alloy," Engineering Fracture Mechanics, Vol.114, pp.42-54, doi: 10.1016/j.engfracmech.2013.10.012

[J73] Weng, L., Zhang, J., Kalnaus, S., Feng, M., and Jiang, Y., 2013, "Corrosion Fatigue Crack Growth of AISI 4340 Steel" International Journal of Fatigue, Vol.48, pp.156-164, doi: 10.1016/j.ijfatigue.2012.10.015

[J72] Wang, F., Dong, J., Ding, W., and Jiang, Y., 2013, "Cyclic deformation and fatigue of extruded Mg-Gd-Y magnesium alloy" Materials Science and Engineering: A, Vol. A561, pp.403-410, doi: 10.1016/j.msea.2012.10.048

[J71] Zheng, S., Yu, Q., and Jiang, Y., 2013, "An experimental study of fatigue crack propagation in extruded AZ31B magnesium alloy" International Journal of Fatigue, Vol.47, pp.174-183, doi: 10.1016/j.ijfatigue.2012.08.010

Top

[J70] Yu, Q., Zhang, J., Li, Q., and Jiang, Y., 2012, "Effect of strain ratio on cyclic deformation and fatigue of extruded AZ61A magnesium alloy" International Journal of Fatigue, Vol.44, pp.225-233, doi: 10.1016/j.ijfatigue.2012.04.013

[J69] Xiong, Y., Yu, Q., and Jiang, Y., 2012, "Multiaxial fatigue of extruded AZ31B magnesium alloy" Materials Science and Engineering: A, Vol.546, pp.119-128, doi: 10.1016/j.msea.2012.03.039

[J68] Onal, O., Canadinc, D., Sehitoglu, H., Verzal, K., and Jiang, Y., 2012, "Investigation of rolling contact crack initiation in bainitic and pearlitic rail steels" Fatigue & Fracture of Engineering Materials & Structures, Vol.35, pp.985-997, doi: 10.1111/j.1460-2695.2012.01686.x

[J67] Yu, Q., Zhang, J., Jiang, Y., and Li, Q., 2012, "An Experimental Study on Cyclic Deformation and Fatigue of Extruded ZK60 Magnesium Alloy," International Journal of Fatigue, Vol.36, pp.47-58, doi: 10.1016/j.ijfatigue.2011.08.016

Top

[J66] Yu, Q., Zhang, J., and Jiang, Y., 2011, "Direct observation of twinning–detwinning–retwinning on magnesium single crystal subjected to strain-controlled cyclic tension–compression in [0001] direction," Philosophical Magazine Letters, Vol.91, pp.757-765, doi: 10.1080/09500839.2011.617713

[J65] Yu, Q., Zhang, J., Jiang, Y., 2011, "Fatigue damage development in pure polycrystalline magnesium under cyclic tension-compression loading," Material Science and Engineering: A, Vol 528, Issues 25-26, pp.7816-7826, doi: 10.1016/j.msea.2011.06.064

[J64] Zhang, J., Yu, Q., Jiang, Y., and Li Q., 2011, "An experimental study of cyclic deformation of extruded AZ61A magnesium alloy," International Journal of Plasticity, Vol.27, pp.768-787, doi: 10.1016/j.ijplas.2010.09.004

[J63] Li, Q., Yu, Q., Zhang, J., and Jiang, Y., 2011, "Microstructure and deformation mechanism of Mg6Al1ZnA alloy experienced tension-compression cyclic loading," Scripta Materialia, Vol.64, pp.233-236, doi: 10.1016/j.scriptamat.2010.10.017

[J62] Yu, Q., Zhang, J., Jiang, Y. and Li, Q., 2011, "Multiaxial fatigue of extruded AZ61A magnesium alloy," International Journal of Fatigue, Vol.33, pp.437-447, doi: 10.1016/j.ijfatigue.2010.09.020

[J61] Zhang, J., Kalnaus, S., Behrooz, M., and Jiang, Y., 2011, "Effect of Loading History on Stress Corrosion Cracking of 7075-T651 Aluminum Alloy in Saline Aqueous Environment," Metallurgical and Materials Transactions A, Vol.42, pp.448-460, doi: 10.1007/s11661-010-0419-8

[J60] Kalnaus, S., Zhang, J., and Jiang, Y., 2011, "Stress-Corrosion Cracking of AISI 4340 Steel in Aqueous Environments," Metallurgical and Materials Transactions A, Vol.42, pp.434-447, doi: 10.1007/s11661-010-0335-y

Top

[J59] Li, Q., Yu, Q., Zhang, J., and Jiang, Y., 2010, "Effect of strain amplitude on tension-compression fatigue behavior of extruded Mg6Al1ZnA magnesium alloy," Scripta Materialia, Vol.62, pp.778-781, doi: 10.1016/j.scriptamat.2010.01.052

[J58] Gao, Z., Qiu, B., Wang, X., Jiang, Y., 2010, "An investigation of fatigue of a notched member," International Journal of Fatigue, Vol.32, pp. 1960-1969, doi: 10.1016/j.ijfatigue.2010.07.005

[J57] Jiang, Y., Ott, W., Baum, C., Vormwald, M., and Nowack, H., 2009, "Fatigue life predictions by integrating EVICD fatigue damage model and an advanced cyclic plasticity theory," International Journal of Plasticity, Vol.25, pp.780-801, doi: 10.1016/j.ijplas.2008.06.007

[J56] Wirtz, R., Zhao, T., and Jiang, Y., 2009, "Thermal and Mechanical Characteristics of a Multi-Functional Thermal Energy Storage Structure," IEEE Transactions on Components and Packaging Technologies, Vol.32, No.1, pp.53-62, doi: 10.1109/TCAPT.2008.2002880

[J55] Wang, X., Gao, Z., Zhao, T., and Jiang, Y., 2009, "An Experimental Study of the Crack Growth Behavior of 16MnR Pressure Vessel Steel," ASME Journal of Pressure Vessel Technology, Vol.131, 021402, doi: 10.1115/1.3008034

[J54] Gao, Z., Zhao, T., Wang, X., and Jiang, Y., 2009, "Multiaxial Fatigue of 16MnR Steel," ASME Journal of Pressure Vessel Technology, Vol.131, 021403, doi: 10.1115/1.3008041

[J53] Kalnaus, S., Fan, F., Jiang, Y., and Vasudévan, A.K., 2009, "An Experimental Investigation of Fatigue Crack Growth of Stainless Steel 304L," International Journal of Fatigue, Vol.31, pp.840-849 doi: 10.1016/j.ijfatigue.2008.11.004

Top

[J52] Fan, F., Kalnaus, S., and Jiang, Y., 2008, "Modeling of Fatigue Crack Growth of Stainless Steel 304L," Mechanics of Materials, Vol.40, pp.961-973, doi: 10.1016/j.mechmat.2008.06.001

[J51] Zhang, J. and Jiang, Y., 2008, "Constitutive Modeling of Cyclic Plasticity Deformation of a Pure Polycrystalline Copper," International Journal of Plasticity, Vol.24, pp.1890-1915, doi: 10.1016/j.ijplas.2008.02.00

[J50] Kalnaus, S. and Jiang, Y., 2008, "Fatigue of AL6XN Stainless Steel," ASME Journal of Engineering Materials and Technology, Vol.130, 031013, doi: 10.1115/1.2931154

[J49] Jiang, Y. and Zhang, J., 2008, "Benchmark Experiments and Characteristic Cyclic Plasticity Behavior," International Journal of Plasticity, Vol.24, pp.1481-1515, doi: 10.1016j.ijplas.2007.10.003

[J48] Kalnaus, S., Fan, F., Vasudevan, A.K., and Jiang, Y., 2008, "An Experimental Investigation on Fatigue Crack Growth of AL6XN Stainless Steel," Engineering Fracture Mechanics, Vol.75, pp.2002-2019, doi: 10.1016/j.engfracmech.2007.11.002

[J47] Zhao, T., Zhang, J., and Jiang, Y., 2008, "A Study of Fatigue Crack Growth of 7075-T651 Aluminum Alloy," International Journal of Fatigue, Vol.30, pp.1169-1181, doi: 10.1016/j.ijfatigue.2007.09.006

[J46] Zhao, T. and Jiang, Y., 2008, "Fatigue of 7075-T651 Aluminum Alloy," International Journal of Fatigue, Vol.30, pp.834-849, doi: 10.1016/j.ijfatigue.2007.07.005

Top

[J45] Zhang, M., Jiang, Y., and Lee, C.-H., 2007, "Finite Element Modeling of Self-Loosening of Bolted Joints," ASME Journal of Mechanical Design, Vol.129, pp.218-226, doi: 10.1115/1.2406092

[J44] Jiang, Y., Hertel, O., and Vormwald, M., 2007, "An Experimental Evaluation of Three Critical Plane Multiaxial Fatigue Criteria," International Journal of Fatigue, Vol.29, pp.1490-1502, doi: 10.1016/j.ijfatigue.2006.10.028

[J43] Zhang, J. and Jiang, Y., 2007, "An Experimental Study of the Formation of Typical Dislocation Patterns in Polycrystalline Copper under Cyclic Shear," Acta Metallurgica et Materialia, Vol.55, pp.1831-1842, doi: 10.1016/j.actamat.2006.10.044

[J42] Ding, F., Feng, M., and Jiang, Y., 2007, "Modeling of Fatigue Crack Growth from a Notch," International Journal of Plasticity, Vol.23, No.7, pp.1167-1188, doi: 10.1016/j.ijplas.2006.10.010

[J41] Ding, F., Zhao, T., and Jiang, Y., 2007, "A Study of Fatigue Crack Growth with Changing Loading Direction," Engineering Fracture Mechanics, Vol.74, pp.2014-2029, doi: 10.1016/j.engfracmech.2006.10.013

[J40] Jiang, Y., Ding, F., and Feng, M., 2007, "An Approach for Fatigue Life Prediction," ASME Journal of Engineering Materials and Technology, Vol.129, pp.182-189, doi: 10.1115/1.2400260

Top

[J39] Feng, M., Ding, F., and Jiang, Y., 2006, "A Study of Loading Path Influence on Fatigue Crack Growth under Combined Loading," International Journal of Fatigue, Vol.28, pp.19-27, doi: 10.1016/j.ijfatigue.2005.04.002

[J38] Jiang, Y., Zhang, M., and Lee, C.-H., 2006, "An Experimental Investigation of the Effects of Clamped Length and Loading Direction on Self-Loosening of Bolted Joints," ASME Journal of Pressure Vessel Technology, Vol.128, pp.388-393, doi: 10.1115/1.2217972

[J37] Kalnaus, S. and Jiang, Y., 2006, "Fatigue Life Prediction of Copper Single Crystals Using a Critical Plane Approach," Engineering Fracture Mechanics, Vol.73, pp.684-696, doi: 10.1016/j.engfracmech.2005.11.003

[J36] Zhang, J. and Jiang, Y., 2006, "Fatigue of Polycrystalline Copper with Different Grain Sizes and Texture," International Journal of Plasticity, Vol.22, pp.536-556, doi: 10.1016/j.ijplas.2005.04.006

[J35] Kavlicoglu, B.M., Gordaninejad, F., Saiidi, M., Jiang, Y., 2006, "Behavior of a Graphite/Epoxy-Concrete Bridge Girder," Composites Part B: Engineering, Vol.37, Issues 2-3, pp. 171-181, doi: 10.1016/j.compositesb.2005.05.013

Top

[J34] Zhang, J. and Jiang, Y., 2005, "An Experimental Study of Inhomogeneous Plastic Deformation of 1045 Steel under Multiaxial Cyclic Loading," International Journal of Plasticity, Vol.21, pp.2174-2190, doi: 10.1016/j.ijplas.2005.02.003

[J33] Zhang, J. and Jiang, Y., 2005, "Lüders Bands Propagation of 1045 Steel under Multiaxial Stress State," International Journal of Plasticity, Vol.21, pp.651-670, doi: 10.1016/j.ijplas.2004.05.001

[J32] Zhang, J. and Jiang, Y., 2005, "An Experimental Investigation on Cyclic Plastic Deformation and Substructures Polycrystalline Copper," International Journal of Plasticity, Vol.21, pp.2191-2211, doi: 10.1016/j.ijplas.2005.02.004

[J31] Jiang, Y., Feng, M., and Ding, F., 2005, "A Reexamination of Plasticity-Induced Crack Closure in Crack Propagation," International Journal of Plasticity, Vol.21, pp.1720-1740, doi: 10.1016/j.ijplas.2004.11.005

[J30] Feng, M., Ding, F., and Jiang, Y., 2005, "A Study of Crack Growth Retardation due to Artificially Induced Crack Surface Contact," International Journal of Fatigue, Vol.27, pp.1319-1327, doi: 10.1016/j.ijfatigue.2005.06.019

[J29] Wen, Z., Jin, X., and Jiang, Y., 2005, "Elastic-Plastic Finite Element Analysis of Nonsteady State Partial Slip Wheel-Rail Rolling Contact," ASME Journal of Tribology, Vol.127, pp.713-721, doi: 10.1115/1.2033898

Top

[J28] Zhang, J. and Jiang, Y., 2004, "A Study of Inhomogeneous Plastic Deformation of 1045 Steel," ASME Journal of Engineering Materials and Technology, Vol.126, pp.164-171, doi: 10.1115/1.1647125

[J27] Jiang, Y. and Feng, M., 2004, "Modeling of Fatigue Crack Propagation," ASME Journal of Engineering Materials and Technology, Vol.126, pp.77-86, doi: 10.1115/1.1631026

[J26] Xu, B., and Jiang, Y., 2004, "A Cyclic Plasticity Model for Single Crystals," International Journal of Plasticity, Vol.20, No.12, pp. 2161-2178, doi: 10.1016/j.ijplas.2004.05.003

[J25] Jiang, Y., Zhang, M., Park, T.-W., and Lee, C.-H., 2004, "An Experimental Study of Self-Loosening of Bolted Joints," ASME Journal of Mechanical Design, Vol.126, pp.925-931, doi: 10.1115/1.1767814

Top

[J24] Xu, B. and Jiang, Y., 2003, "A Continuum Model for Single Crystal Cyclic Plasticity," Materials Research Society, Vol. 779, W5.30, pp.1-6, doi: 10.1557/PROC-779-W5.30

[J23] Jiang, Y., Zhang, M., and Lee, C.-H., 2003, "A Study of Early Stage Self-Loosening of Bolted Joints," ASME Journal of Mechanical Design, Vol.125, pp.518-526, doi: 10.1115/1.1586936

[J22] Xu, B. and Jiang, Y., 2002, "Elastic-Plastic Finite Element Analysis of Partial Slip Rolling Contact," ASME Journal of Tribology, Vol.124, pp.20-26, doi: 10.1115/1.1395630

[J21] Jiang, Y., Xu, B., and Sehitoglu, H., 2002, "Three-Dimensional Elastic-Plastic Stress Analysis of Rolling Contact," ASME Journal of Tribology, Vol.124, pp.699-708, doi: 10.1115/1.1491978

[J20] Jiang, Y., 2001, "An Experimental Study of Inhomogeneous Cyclic Plastic Deformation," ASME Journal of Engineering Materials and Technology, Vol.123, pp.274-280, doi: 10.1115/1.1373652

[J19] Jiang, Y., Chang, J., and Xu., B., 2001, "Elastic-Plastic Finite Element Stress Analysis of Two-Dimensional Rolling Contact," Hydraulic Failure Analysis: Fluids, Components, and System Effects, ASTM STP 1339, G.E. Toten, D.K. Wills, and D. Feldmann, Eds., American Society for Testing and Materials, West Conshohocken, PA, 2001, pp.59-74, doi: 10.1520/STP38267S

[J18] Jiang, Y. and Xu, B., 2001, "Deformation Analysis of Notched Components and Assessment of Approximate Methods," Fatigue and Fracture of Engineering Materials and Structures, Vol. 24, pp.729-740, doi: 10.1046/j.1460-2695.2001.00410.x

[J17] Jiang, Y., Chang, J., Lee, C., and Xu, B., 2001, "An Experimental Study of the Torque-Tension Relationship for Bolted Joints," International Journal of Materials and Product Technology, Vol.16, pp.417-429 doi: 10.1504/IJMPT.2001.001264

[J16] Jiang, Y., 2000, "A Fatigue Criterion for General Multiaxial Loading," Fatigue and Fracture of Engineering Materials and Structures, Vol.23, pp.19-32, doi: 10.1046/j.1460-2695.2000.00247.x

Top

[J15] Kurath, P., Jiang, Y., and Fatemi, A., 1999, "Strain Path Influence on Multiaxial Deformation and Fatigue Damage," in Multiaxial Fatigue of an Induction Hardened Shaft, AE-28, Chapter 12, Tom Cordes and Kevin Lease, Eds., Society of Automotive Engineers, Inc., pp.117-139

[J14] Jiang, Y. and Sehitoglu, H., 1998, "A Model for Rolling Contact Failure," Wear, Vol.224, No1., pp.66-78, doi: 10.1016/S0043-1648(98)00311-1

[J13] Jiang, Y., 1998, "Stress and Fatigue Analyses of an Induction Hardened Component," Metals and Materials, Vol.4, pp.520-523, doi: 10.1007/BF03187820

[J12] Jiang, Y. and Kurath, P., 1997, "An Investigation of Cyclic Transient Behavior and Implications on Fatigue Life Estimates," ASME Journal of Engineering Materials and Technology, Vol.119, pp.161-170, doi: 10.1115/1.2805989

[J11] Jiang, Y. and Kurath, P., 1997, "NonProportional Cyclic Deformation: Critical Experiments and Analytical Modeling," International Journal of Plasticity, Vol.13, pp.743-763, doi: 10.1016/S0749-6419(97)00030-2

[J10] Jiang, Y. and Sehitoglu, H., 1996, "Modeling of Cyclic Ratchetting Plasticity: Part I---Development of Constitutive Equations," ASME Journal of Applied Mechanics, Vol.63, pp.720-725, doi: 10.1115/1.2823355

[J9] Jiang, Y. and Sehitoglu, H., 1996, "Modeling of Cyclic Ratchetting Plasticity: Part II---Implement of the New Model and Comparison of Theory with Experiments," ASME Journal of Applied Mechanics, Vol.63, pp.726-733, doi: 10.1115/1.2823356

[J8] Jiang, Y. and Kurath, P., 1996, "Characteristics of the Armstrong-Frederick Type Plasticity Models," International Journal of Plasticity, Vol.12, pp.387-415, doi: 10.1016/S0749-6419(96)00013-7

[J7] Jiang, Y. and Sehitoglu, H., 1996, "Comments on the Mroz Multiple Surface Type Plasticity Models," International Journal of Solids and Structures, Vol.33, pp.1053-1068, doi: 10.1016/0020-7683(95)00088-7

[J6] Jiang, Y. and Sehitoglu, H., 1996, "Rolling Contact Stress Analysis with the Application of a New Plasticity Model," Wear, Vol.191, pp.35-44, doi: 10.1016/0043-1648(95)06663-2

[J5] Jiang, Y. and Kurath, P., 1996, "A Theoretical Evaluation of Plasticity Hardening Algorithms for Cyclic Nonproportional Loadings," ACTA Mechanica, Vol.118, pp.213-234, doi: 10.1007/BF01410518

[J4] Kevin, B.L., Stephens, R.I., Jiang, Y. and Kurath, P., 1996, "Fatigue of a Particulate Reinforced Aluminum Metal Matrix Composite Subjected to Axial, Torsional and Biaxial Loadings," Fatigue and Fracture of Engineering Materials and Structures, Vol.19, pp.1031-1043, doi: 10.1111/j.1460-2695.1996.tb01038.x

[J3] Jiang, Y. and Sehitoglu, H., 1994, "An Analytical Approach to Elastic-Plastic Stress Analysis of Rolling Contact," ASME Journal of Tribology, Vol.116, pp.577-587, doi: 10.1115/1.2928885

[J2] Jiang, Y. and Sehitoglu, H., 1994, "Cyclic Ratchetting of 1070 Steel under Multiaxial Stress States," International Journal of Plasticity, Vol.10, No.5, pp.579-608, doi: 10.1016/0749-6419(94)90015-9

[J1] Jiang, Y. and Sehitoglu, H., 1994, "Multiaxial Cyclic Ratchetting under Multiple Step Loading," International Journal of Plasticity, Vol.10, No.8, pp.849-870, doi: 10.1016/0749-6419(94)90017-5

Top


[C96] Gong, M., Xu, S., Liu, G., Liu, Y., Jiang, Y., Hirth, J., Capolungo, L., Tomé, C., Wang, J., 2018, “Atomistic Simulations of Dislocation-Twin and Twin-Twin Interactions Magnesium,” 18th International Conference on the Strength of Materials (ICSMA 18), July 15–19, 2018, The Ohio State University, Columbus, Ohio, USA

[C95] Dong, J., Dong, S., Jiang, Y., Jin, L., 2018, “Cyclic Deformation and Fatigue of Two High Strength Mg Alloys,” 18th International Conference on the Strength of Materials (ICSMA 18), July 15–19, 2018, The Ohio State University, Columbus, Ohio, USA

[C94] Chen, P., Li, B., Culbertson, D., Jiang, Y., 2018, "Twin-slip interaction in an AZ31 Mg alloy," 2018 TMS Annual Meeting & Exhibition, March 11-15, 2018, Phoenix, Arizona

[C93] Culbertson, D., Jiang, Y., 2018, "In-situ and ex-situ EBSD observations of adjacent twin pair chains," International Conference on Plasticity, Damage, and Fracture 2018, January 3-9, 2018, San Juan, Puerto Rico, USA

[C92] Dong, S., Wang, F., Dong, J., Ding, W., Jiang, Y., 2017, "Cyclic deformation and fatigue of two extruded Mg alloys," Advancements in Theoretical and Applied Plasticity, Proceedings of the 23nd International Symposium on Plasticity and Its Current Applications, January 3-9, 2017, Puerto Vallarta, Mexico

[C91] Jiang, Y., Culbertson, D., Yu, Q., Wang, J., 2017, "Deformation mechanisms in magnesium alloys in different material orientations under pure shear," Advancements in Theoretical and Applied Plasticity, Proceedings of the 23nd International Symposium on Plasticity and Its Current Applications, January 3-9, 2017, Puerto Vallarta, Mexico

[C90] Jiang, Y., 2016, "Multiaxial deformation and fatigue of magnesium alloys," 2016, Plenary Lecture, 11th International Conference on Multiaxial Fatigue and Fracture, June 1-4, 2016, Seville, Spain

[C89] Liu, Y., Li, N., Wang, J., Mccabe, R.J., Jiang, Y. and Tome, C.N., 2016, "Exploring the Mechanical Behavior and Microstructure Evolution of Twin-twin Junctions in Mg by In Situ Compression," 2016 TMS Annual Meeting & Exhibition, February 14-18, 2016, Nashville, TN

[C88] Yu, Q., Wang, J., and Jiang, Y., 2016, "Thickness-dependent deformation and fracture characteristics of AL6XN super-austenitic stainless steel subjected to tensile and fatigue loads," Advancements in Theoretical and Applied Plasticity, Proceedings of the 22nd International Symposium on Plasticity and Its Current Applications, January 3-9, 2016, Keauhou Bay, Hawaii

[C87] Jiang, Y., Yu, Q., Qiong, Y., Dong, S., and Wang, J., 2016, "Twinning-detwinning deformation and fatigue in magnesium alloys," Advancements in Theoretical and Applied Plasticity, Proceedings of the 22nd International Symposium on Plasticity and Its Current Applications, January 3-9, 2016, Keauhou Bay, Hawaii

[C86] Dong, S., Wang, F, Dong, J., Ding, W., and Jiang, Y., 2016, "Aging effects on cyclic deformation and fatigue of extruded GW83 and ZK60 alloys," Advancements in Theoretical and Applied Plasticity, Proceedings of the 22nd International Symposium on Plasticity and Its Current Applications, January 3-9, 2016, Keauhou Bay, Hawaii

[C85] Liu, Y., Li, N., Wang, J., Mccabe, R.J., Jiang, Y., and Tome, C.N., 2015, "Yield strength and work hardening associated with twin nucleation and propagation," 2015 MRS Fall Meeting & Exhibition, November 29-December 4, 2015, Boston, MA

[C84] Mei, J., Dong, P., and Jiang, Y., 2015, "A path-dependent mixed-mode crack growth model for non-proportional multi-axial fatigue loading," 15th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics, May 20-22, 2015, Anaheim, CA

[C83] Wei, Z., Jiang, Y., and Dong, P., 2014, "Loading path effect on mixed-mode fatigue growth and multiaxial fatigue life assessment," ASTM E08 Committee Meeting, New Orleans, LA

[C82] Jiang, Y., 2014, "Durability of Bolted Joints," 2014 International Conference on Advances in Product Development and Reliability, July 29-30, 2014, Hangzhou, China

[C81] Jiang, Y., 2014, "Multiaxial Fatigue of 7075T651 Alluminum Alloy: Fatigue and Crack Growth under Combined Loading" 2014 Multiaxial/Multiscale Fatigue Summit, June 10-13, 2014, Alexandria, VA

[C80] Jiang, Y., 2014, "A fatigue approach bridging fatigue crack initiation and crack growth" 2014 Multiaxial/Multiscale Fatigue Summit, June 10-13, 2014, Alexandria, VA

[C79] Yu, Q., Wang, J., Jiang, Y., McCabe, R.J., and Tome, C.N., 2014, "Twin-twin Interactions in Magnesium Single Crystal," TMS 143rd Annual Meeting, February 16-20, 2014, San Diego, CA

[C78] Yu, Q., Wang, J., and Jiang, Y., 2013, "Study of Cyclic Deformation of Mg Single Crystal in [0001] Direction Utilizing in situ Optical Microscopy," TMS 142nd Annual Meeting, March 3-7, 2013, San Antonio, TX

[C77] Jiang, Y., Yu, Q., and Wang, J., 2013, "An Experimental Study of Deformation Twin Formation under Cyclic Loading in Pure Polycrystalline Magnesium," Plasticity’13, January 3-8, 2013, Nassau, Bahamas

[C76] Jiang, Y., Yu, Q., and Wang, J., 2013, "Cyclic Plastic Deformation and Fatigue Damage of Magnesium Single Crystals," Plasticity’13, January 3-8, 2013, Nassau, Bahamas

[C75] Yu, Q., Zhang, J., Jiang, Y., and Li, Q., 2011, "An experimental study on cyclic deformation and fatigue of extruded ZK60 magnesium alloy," TMS 140th Annual Meeting, February 27-March 3, 2011, San Diego, CA

[C74] Zhang, J., Yu, Q., Jiang, Y., and Li, Q., 2011, "Effect of strain ratio on cyclic deformation and fatigue of extruded magnesium alloy AZ61A," TMS 140th Annual Meeting, February 27-March 3, 2011, San Diego, CA

[C73] Jiang, Y., Zhang, J. Yu, Q., and Li, Q., 2011, "Cyclic deformation of extruded AZ61A magnesium alloy," Proceedings of Plasticity’11, Plasticity’11, 2011

[C72] Jiang, Y., Zhang, J. Yu, Q., and Li, Q., 2010, "Cyclic deformation and multiaxial fatigue of extruded AZ61A magnesium alloy," International Conference on Mechanical Properties of Materials (ICMPM), May 24-28, 2010, Hangzhou, P.R. China

[C71] Jiang, Y., Yu, Q., Feng, M., and Misra, M., 2009, "Constitutive Modeling of creep deformation," Proceedings of Plasticity'09, pp.190-192, January 3-9, 2009, St. Thomas, US Virgin Islands

[C70] Kalnaus, S. and Jiang, Y., 2009, "A Study of Fatigue Behavior of AISI 4340 VM," Proceedings of Plasticity'09, pp.193-195, January 3-9, 2009, St. Thomas, US Virgin Islands

[C69] Jiang, Y., 2008, "Multiaxial Fatigue," Fracture Mechanics, November 1-5, 2008, Hangzhou China

[C68] Qiu, B., Gao, Z., Wang, X., Jiang, Y., 2008, "Prediction of fatigue initiation life of 16MNR notched components," American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 6, pp. 159-166

[C67] Kalnaus, S., Fan, F., Vasudevan, A.K., and Jiang, Y., 2008, "An experimental investigation of fatigue crack growth of stainless steel 304L," International Conference on Fatigue Damage of Structural Materials VII, September 14-19, 2008, Hyannis, MA

[C66] Zhang, J. and Jiang, Y., 2008, "Crack Growth Modeling of 7075T651 Aluminum Alloy," International Conference on Fatigue Damage of Structural Materials VII, September 14-19, 2008, Hyannis, MA

[C65] Jiang, Y., 2008, "An experimental evaluation of critical plane multiaxial fatigue criteria," International Conference on Fatigue Damage of Structural Materials VII, September 14-19, 2008, Hyannis, MA

[C64] Wen, Z., Jin, X., and Jiang, Y., 2008, "An Numerical Analysis Of Plastic Deformation Induced Rail Corrugation," Proceedings of the 9th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA2008, ESDA2008-59376, July 7-9, 2008, Haifa, Israel

[C63] Jiang, Y., 2008, "The Applicability of Macroscopic Continuum Mechanics to Fatigue Life Prediction," 2nd International Conference on Heterogeneous Material Mechanics (ICHMM-2008), June 3-8, 2008, Huangshang, China

[C62] Jiang, Y. and Zhang, J., 2008, "Constitutive Modeling of Cyclic Hardening, Nonproportional Hardening, and Strain Ratchetting in Cyclic Plasticity," Plasticity'08: International Symposium on Plasticity 2008 and Its Current Applications, Keynote, January 3-8, 2008, Kona, Hawaii

[C61] Jiang, Y., Feng, M., and Gao, Z.L., 2008, "Finite Element Modeling of Crack Tip Plasticity with the Consideration of Element Size and Element Type," Plasticity'08: International Symposium on Plasticity 2008 and Its Current Applications, January 3-8, 2008, Kona, Hawaii

[C60] Kalnaus, S., Fan, F., and Jiang, Y., 2007, "Fatigue and Cyclic Plasticity Properties of AL6XN Stainless Steel," Proceedings of PVP 2007, PVP200726478, 2007 ASME Pressure Vessels and Piping Division Conference, July 22-26, 2007 San Antonio, Texas

[C59] Qui, B., Gao, Z., Wang, X., and Jiang, Y., 2007, "Prediction of Fatigue Initiation Life of 16MnR Notched Components," Proceedings of PVP 2007, PVP200726779, 2007 ASME Pressure Vessels and Piping Division Conference, July 22-26, 2007 San Antonio, Texas

[C58] Jiang, Y. and Zhang, J., 2007, "Constitutive Modeling of Cyclic Plasticity with an Emphasis on Cyclic Hardening, Nonproportional Hardening and Strain Ratcheting," Presented at Fifth International Conference on Nonlinear Mechanics, June 10-14, 2007, Shanghai, China

[C57] Jiang, Y. and Zhao, T., 2006, "Multiaxial Fatigue of 7075-T651 Aluminum," International Conference on Fatigue Damage of Structural Materials VI, September 16-22, 2006, Hyannis, MA

[C56] Jiang, Y., Fan, F., Zhao, T., Zhang, J., and Ding, F., 2006, "An Elastic-Plastic Finite Element Analysis of Residual Stresses near Notch and Crack Tip," International Conference on Fatigue Damage of Structural Materials VI, September 16-22, 2006, Hyannis, MA

[C55] Wang, Z. and Jiang, Y., 2006, "Study of A Major Mechanism for Self-Loosening of Bolted Joints," Proceedings of PVP2006-ICPVT-11, PVP2006-ICPVT11-93463, 2006 ASME Pressure Vessels and Piping Division Conference, July 23-27, 2006, Vancouver, BC, Canada

[C54] Jiang, Y., Ding, F., Zhao, T., Wang, X., and Gao, Z., 2006, "Multiaxial Fatigue of 16MnR Steel," Proceedings of PVP2006-ICPVT-11 2006, PVP2006-ICPVT-11-93473, ASME Pressure Vessels and Piping Division Conference, July 23-27, 2006, Vancouver, BC, Canada

[C53] Wang, X., Jiang, Y., Ding, F., Zhao, T., and Gao, Z., 2006, "An Experimental Investigation of Crack Growth Behavior of a Pressure Vessel Steel," Proceedings of PVP2006-ICPVT-11 2006, PVP2006-ICPVT-11-93471, ASME Pressure Vessels and Piping Division Conference, July 23-27, 2006, Vancouver, BC, Canada

[C52] Jiang, Y., 2006, "A Fatigue Prediction Approach Based upon Cyclic Plasticity of Materials," Plasticity'2006, July 19-23, 2006, Halifax, Canada

[C51] Jiang, Y., 2006, "Benchmark Experiments and Characteristic Cyclic Plasticity Deformation," Plasticity'2006, Halifax, Canada

[C50] Kalnaus, S. and Jiang, Y., 2006, "Fatigue Life Prediction of Copper Single Crystals Using a Critical Plane Approach," Fatigue'2006, FT255, May 14-18, 2006, Atlanta

[C49] Ding, F. and Jiang, Y., 2006, "Crack Growth with Change of Loading Direction," Fatigue'2006, FT264, May 14-18, 2006, Atlanta

[C48] Zhao, T. and Jiang, Y., 2006, "Fatigue of 7075T6 Aluminum Alloy," Fatigue'2006, FT266, May 14-18, 2006, Atlanta

[C47] Jiang, Y., 2006, "Fatigue Life Predictions Based on Cyclic Plasticity of Materials," 38. Tagung des DVM-Arbeitskreises Bruchvorg?nge, Aachen, February 14-15, 2006, Aachen, Germany, ISSN 1616-4687, pp.239-254

[C46] Jiang, Y., Ding, F., and Feng, M., 2005, "An Approach for Fatigue Life Predictions," 2005 ASME Pressure Vessels and Piping Division Conference, PVP2005-71607, July 17-21, 2005, Denver, Colorado, USA

[C45] Jiang, Y. and Zhao, T., 2005, "A Pseudo-Plasticity Concept for Fatigue Damage Assessment," Dislocations, Plasticity, Damage and Metal Forming: Material Response and Multiscale Modeling---Proceedings of PLASTICITY'05, A.S. Khan and A.R. Khoei, Eds., Neat Press, pp.202-204

[C44] Zhang, J. and Jiang, Y., 2005, "A Study of Cyclic Plasticity and Dislocation Substructures of Polycrystalline Copper," Dislocations, Plasticity, Damage and Metal Forming: Material Response and Multiscale Modeling---Proceedings of PLASTICITY'05, A.S. Khan and A.R. Khoei, Eds., Neat Press, pp.253-255

[C43] Jiang, Y., Feng, M., and Ding, F., 2004, "Bridging Crack Initiation and Crack Growth," International Conference on Fatigue Damage of Structural Materials V, Setpember, 2004, Hyannis, MA

[C42] Jiang, Y. and Feng, M., 2004, "A New Approach to Predicting Fatigue Crack Propagation," ASME PVP-Vol.474, Fracture Methodologies and Manufacturing Process, July 25-29, 2004, San Diego, California, PVP2004-2297, pp.23-31

[C41] Zhang, M., Jiang, Y., and Lee, C.-H., 2004, "An Experimental Investigation of the Effects of Clamped Length and Loading Direction on Self-Loosening of Bolted Joints," PVP-Vol.478, Analysis of Bolted Joints, July 25-29, 2004, San Diego, California, PVP2004-2631, pp.129-136

[C40] Zhang, M., Jiang, Y., and Lee, C.-H., 2004, "Finite Element Modeling of Self-Loosening of Bolted Joints," PVP-Vol.478, Analysis of Bolted Joints, July 25-29, 2004, San Diego, California, PVP2004-2618, pp.19-27

[C39] Wirtz, R., Zhao, T., and Jiang, Y., 2004, "Thermal and Mechanical Characteristics of A Multi-Functional Thermal Energy Storage Structure," Presented for Presentation at ITherm 2004, Las Vegas

[C38] Jiang, Y. and Zhang, J., 2004, "Inhomogeneous Cyclic Plastic Deformation of 1045 Steel," Proceedings of International Conference on Heterogeneous Materials Mechanics, June 22-26, 2004,, Chongqing, China pp.185-188

[C37] Zhang, J. and Jiang, Y., 2004, "An Investigation of Nonproportional Hardening of Polycrystalline Copper," Proceedings of International Conference on Heterogeneous Materials Mechanics, June 22-26, 2004,, Chongqing, China, pp.193-196

[C36] Xu, B. and Jiang, Y., 2004, "A Cyclic Plasticity Model For Single Crystals," Proceedings of International Conference on Heterogeneous Materials Mechanics, June 22-26, 2004,, Chongqing, China, pp.202-205

[C35] Wirtz, R. A., Narla, V., Zhao, T., Jiang, Y., 2004, "Non-Metallic and Structurally Efficient Thermal Energy Storage Composites for Avionics Temperature Control, Part I: Thermal Characterization", Paper AIAA-2004-0343, AIAA Aerospace Sciences Meeting, Jan. 2004

[C34] Zhao, T., Jiang, Y., Wirtz, R. A., and Narla, 2004, "Non-Metallic and Structurally Efficient Thermal Energy Storage Composites for Avionics Temperature Control, Part II: Mechanical Characterization", Paper AIAA-2004-0344, AIAA Aerospace Sciences Meeting, Jan. 2004

[C33] Jiang, Y., Feng, M., and Ding, F., "A Reexamination of Crack Closure Concept in Fatigue Crack Propagation," Second International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (34th ASTM National Symposium on Fatigue and Fracture Mechanics), November 19-21, 2003, Tampa, FL

[C32] Jiang, Y., Zhang, M., Park, T.-W., and Lee, C.-H., 2003, "An Experimental Investigation on Self-Loosening of Bolted Joints," ASME PVP, Cleveland, OH, July, 2003, PVP-Vol.457, Analysis of Bolted Joints, PVP2003-1868, pp.17-22

[C31] Xu, B. and Jiang, Y., 2003, "A Continuum Model for Single Crystal Cyclic Plasticity," MRS Spring Meeting, April 21-25, 2003, San Francisco, CA, MRS Proceedings

[C30] Jiang, Y., Xu, B., and Sehitoglu, H., 2003, "Three-Dimensional Elastoplastic Analysis of Rolling Contact," Transportation Research Board 2003 Annual Meeting, January 12-16, 2003, Washington DC

[C29] Wirtz, R., Fuchs, A., Narla, V., Shen, Y., Zhao, T., and Jiang, Y., 2003, "A Multi-Functional Graphite/Epoxy-Based Thermal Energy Storage Composite for Temperature Control Sensors and Electronics," 41st Aerospace Sciences Meeting and Exhibit, January 6-10, 2003, Reno, NV

[C28] Jiang, Y., Zhang, M., Park, T.-W., and, Lee, C.-H., 2002, "An Experimental Investigation on Frictional Properties of Bolted Joints," ASME PVP 2002, August 4-8, 2002, Vancouver, BC, Canada, PVP-Vol.433, Analysis of Bolted Joints, ASME 2002, PVP2002-1083

[C27] Jiang, Y. and Zhao, H., 2002, "Modeling of Fatigue Crack Propagation Behavior," Plasticity'02, Plasticity, Damage and Fracture at Macro, Micro and Nano Scales, A.S. Khan and O. Lopez-Pamies, Eds, pp.573-575

[C26] Feng, M. and Jiang, Y., 2002, "Modeling of Fatigue Damage," 14th US National Congress of Theoretical and Applied Mechanics, June 23-28, 2002, Blacksgurg, VA

[C25] Zhang, J., and Jiang, Y., 2002, "Mechanisms of Inhomogeneous Cyclic Plastic Deformation of 1045 Steel," 14th US National Congress of Theoretical and Applied Mechanics, June 23-28, 2002, Blacksgurg, VA

[C24] Jiang, Y., Zhang, M., and Park, T.-W., 2002, "An Investigation of Early Stage Self-Loosening of Bolted Joints under Repeated Transverse Loading," 4th International Conference of Mechanics and Materials in Design, June 5-8, 2002, Nagoya, Japan

[C23] Jiang, Y. and J. Zhang, 2002, "Micromechanics Mechanisms of Inhomogeneous Cyclic Plastic Deformation," 2002 NSF Design, Service and Manufacture Grantees and Research Conference, January, 2002, San Juan, Puerto Rico

[C22] Jiang, Y., Huang, B., Hua, Z., and Lee, C.-H., 2001, "A Study of Early Stage Self-Loosening of Bolted Joints," ASME Winter Meeting, November, 2001, New York, IMECE2001/DE-25100

[C21] Jiang, Y., Xu, B., and Sehitoglu, H., 2001, "Three-Dimensional Elastic-Plastic Stress Analysis of Rolling Contact," Contact Mechanics and Wear of Rail/Wheel Systems

[C20] Kavlicoglu, B.M., Gordaninejad, F., Saiidi, M., and Jiang, Y., 2001, "Analysis and Testing of Graphite/Epoxy Concrete Bridge Girders under Static Loading," Structural Faults + Repair, 9th International Conference and Exhibition, July 4-6, 2001, London, UK

[C19] Jiang, Y., Chang, J., Xu, B., and Wang, Z., 2000, "Mechanisms of Self-Loosening of Bolted Joints," Plastic and Viscoplastic Response of Materials and Metal Forming, Proceedings of Plasticity'00, pp.348-350

[C18] Wang, E., Jiang, Y., Fan, L., and Greer, B., 2000, "Sensitivity of Modeling Parameters in Proximal Femur Analyses," ASME Winter Meeting, Orlando, FL, November 5-10, 2000, Proceedings of IMECE: International Mechanical Engineering Conference and Exposition

[C17] Jiang, Y., Chang, J., Lee, C., and Xu, B., 2000, "Experimental Study of the Torque-Tension Relationship for Bolted Joints," ISSAT International Conference on Reliability and Quality in Design, August 9-11, 2000, Orlando, Florida, pp.195-199

[C16] Jiang, Y., and J. Chang, and Xu, B., 1999, "Elastic-Plastic Finite Element Stress Analysis of Two-Dimensional Rolling Contact," International Symposium on Hydraulic Failure Analysis: Fluids, Components, and System Effects, December 5-6, 1999, Reno, NV

[C15] Wang, Z., Xu, B., and Jiang, Y., 1999, "A Reliable Fatigue Prediction Model for Bolts Under Cyclic Axial Loading," Presented at Fatigue Reliability Modeling and Testing, 1999 Proceedings of the 5th ISSAT International Conference on Reliability and Quality in Design, pp.137-141

[C14] Greer, B., Wang, E., and Jiang, Y., 1999, "On the Appropriateness of Using the Standardized Femur for FEA in the Proximal Region," Presented at 1999 Summer Bioengineering Conference, June 16-20, 1999, Big Sky, Montana, ASME, BED-Vol. 42, pp. 669-670

[C13] Jiang, Y. and Yang, S., 1999, "An Incremental Fatigue Damage Model," Fatigue'99, Beijing, June 8-12, 1999, Proceedings of Fatigue'99, pp.723-728

[C12] Wang, E. and Jiang, Y., 1999, "Integrating Design and Manufacturing Courses in Mechanical Engineering," Presented at ASEE/PSW, March 19-20, 1999, Las Vegas, NV, pp.141-146

[C11] Jiang, Y., 1999, "Fatigue and Plasticity," Constitutive and Damage Modeling of Inelastic Deformation and Phase Transformation, Proceedings of Plasticity'99, A.S. Khan, Ed., pp.905-908

[C10] Jiang, Y. and Kurath, P., 1999, "Investigation of a Localized Cyclic Ratchetting Phenomenon," Constitutive and Damage Modeling of Inelastic Deformation and Phase Transformation, Proceedings of Plasticity'99, A.S. Khan, Ed., pp.909-912

[C9] Xu, B., Jiang, Y., and Yang, S., 1999, "Stress and Fatigue Analyses of Notched Shafts," SAE 1999 Congress, SAE Paper No. 1999-01-0370

[C8] Jiang, Y., 1998, "Cyclic Stress Analysis of Notched Members with the Application of a New Plasticity Model," Invited Lecture at the SAE Fatigue Design and Evaluation Meeting, October 21, 1998, Minneapolis

[C7] Jiang, Y., 1997, "Residual Stresses in Shot Peening," Invited Lecture at the SAE Fatigue Design and Evaluation Meeting, Oct, 1997, Cincinnati

[C6] Jiang, Y., 1997, "An Investigation of Nonproportional Hardening of Cyclic Plasticity," Physics and Mechanics of Finite Plastic and Viscoplastic Deformation: Proceedings of PLASTICITY'97, July, 1997, Juneau, Alaska, pp.355-356

[C5] Jiang, Y., 1997, "Influence of Cyclic Hardening on Ratchetting Modeling," Physics and Mechanics of Finite Plastic and Viscoplastic Deformation: Proceedings of PLASTICITY'97, July, 1997, Juneau, Alaska, pp.357-358

[C4] Jiang, Y. and Kurath, P., 1995, "An Investigation of Cyclic Transient Material Behavior," Presented at the 5th International Symposium on Plasticity and Its Current Applications, July, 1995, Sakai, Japan

[C3] Jiang, Y. and Sehitoglu, H., 1994, "Rolling Contact Stress Analysis with the Application of a New Plasticity Model," Contact Mechanics and Wear of Rail/Wheel Systems, Vancouver

[C2] Jiang, Y. and Sehitoglu, H., 1994, "A New Model for Cyclic Ratchetting Plasticity," 1994 U S National Congress on Applied Mechanics, June 27-July 1, 1994, University of Washington

[C1] Kurath, P., Jiang, Y., and Payne, C., 1993, "Comparison of Life Predictions Based on Three Plasticity Models," SAE Fatigue Design and Evaluation Committee Meeting, March, 1993, Cincinnati

Top